Instructions for use
NEW WOODEN SURFACE: Treat the surface as soon as possible. Impregnation and priming is best done in the summer during construction. Remove removable material, dirt, dust and mold. If necessary, you can use a tool for cleaning facades RENSA FACADE. Apply the colorless composition of WOODEX AQUA BASE to the surface with a brush. Allow to dry for 1 day. Primer with NORDICA PRIMER primer, diluted by 5 - 10%. Allow to dry for 1 - 3 days depending on the weather. Clean rusted steel areas: sanding, steel brushing, etc., and prime with FERREX AQUA anti-corrosion paint. Previously painted OR OLD WOODEN Surface: Areas of the surface which are in a bad condition, to replace with new. Remove removable material, dirt and dust. Completely remove the damaged paint layers. Keep in mind that the adhesion of the old layer of paint may have become so weak that there is a reason to remove the paint, although it seems intact. The old layer of paint is removed, first of all by a scraper or a steel brush and, if possible, a surface heater, the infrared heater intended for these purposes. Secondly, you can use a composition to remove paint or jet cleaning. Wash surfaces with RENSA FACADE and rinse thoroughly with water. The old untreated wooden surface can be treated with a colorless impregnating composition WOODEX AQUA BASE to the primer color, see "NEW WOODEN SURFACE." Primer exposed areas of the surface diluted by 5 - 10% with NORDICA PRIMER primer. Allow to dry for 1 - 3 days depending on the weather. Clean rusted steel areas: sanding, steel brushing, etc., and prime with FERREX AQUA anti-corrosion paint.
To ensure the uniformity of the surface, you should prepare a sufficient amount of paint in one container. Thoroughly mix the paint and apply with a brush, paintbrush or spray in 1 - 2 layers.
TERMS OF APPLICATION
Painted should be dry. The moisture content in the wood should not exceed 20% by weight of the wood in the dry state. During the application and drying of the paint, the temperature of the painted air and the paint must be above + 5 ° C and the relative humidity below 80%. Avoid painting under direct sunlight.
STORAGE Protect from frost.
The dry residue is about 37% of the volume
Volatile organic compounds (VOCs) EU VOC permissible value (kat A / d): 130 g / l. VOC products: max. 130 g / l.
Teknomix tinting system
The density is about 1.2 g / ml
Drying time - to the touch in 1 hour
Cleaning Wash work tools immediately with warm water and detergent after work.
Resistance to weather conditions Very good.
Base 1 and 3 packaging: 0.45 l, 0.9 l, 2.7 l, 9 l, 18 l. Base 5: 0.9 l, 2.7 l, 9 l, 18 l.
See Safety Labels. Safety passport.