Acrylate water-based paint is the most comfortable application.
The surface is well covered.
High decorative characteristics - creates a smooth coating with an elegant silky sheen
Stable brightness at different angles of incidence of light, including in side lighting
After drying, the surface can withstand repeated wet cleaning with detergents.
The paint does not emit harmful substances into the air and meets the requirements of emission class M1.
The maximum permissible VOC content of the product (subgroup a) is 30 g / l. The maximum VOC content in the product is г15 g / l.
Silk-matt for EN 13 300 (ISO 2813).
matt for SFS 3632 (ISO 2813).
group 5 for RYL 2011.
1 class for EN 13 300 (ISO 11998).
38 group of painting rules for RYL 2011.
Painting of walls and ceilings in rooms with normal and high humidity: living and office rooms, children's rooms, bedrooms, corridors, stairwells, salons, clubs, production rooms, etc. Not suitable for painting floors, doors and furniture.
Types of surfaces to be painted
New or previously painted surfaces from concrete, aerated concrete, gypsum cardboard plates, primed chipboard, fiberboard; brick, plastered, plastered surfaces, and also pasted over with fiberglass wall-paper and other finishing materials which are painted.
Surface preparation before painting
Surfaces previously painted with enamel or oil paint should be treated with sandpaper until matte. Wash heavily soiled or greasy surfaces with 3-5% soda ash, then rinse with water and dry. Fill cracks and facets with appropriate putty (Fine Filler, Aqua Filler, etc.). Frequently moistened and moldy surfaces should be treated with Biotol E before painting. Treat porous and dusty surfaces with Aquastop.
Mix the paint thoroughly before use. To apply the first layer, the paint can be diluted with water up to 5% by volume and a relative humidity of not more than 80%. In case of painting works under adverse conditions of draft, use of heating devices, high temperature or low humidity) we recommend to use means for drying Time +.
Painted surface care
The final wear resistance of the coating is obtained after about 4 weeks - during this time, treat the surface carefully until it acquires the final hardness and wear resistance. If necessary, the surface can be lightly cleaned with a soft sponge or cloth about 2 days after application. For washing of the painted surface we recommend to use water, neutral and average alkalinity detergents (pH to 9). Do not use organic solvents, abrasive cleaners, or hard sponges and brushes. Strong friction can make the surface glossy. We recommend using Biotol and Biotol Spray to remove mold.
Roller (pile length 10-14 mm, airless spray (nozzle 0.021 - 0.027 '').
After finishing work, rinse with soap and water.
Machine coloring according to the Eskarocolor system (base A, TR).
6-10 m² / l
At a temperature of + 20 ° C and a relative humidity of 50% in 1-2 hours the coating dries and is ready for the next layer. In the case of lowering the temperature and increasing the humidity, the drying time increases accordingly.